Shop Shots Volume 4
I moved “Shop Shots” up to Wednesday this week. I will actually be out of town for a couple of days. I don’t think there will be a post Thursday or Friday. Make sure you check out the forum too. I know its called Technician DataBase, but its not just for techs. It is for everyone, customer, mechanic, enthusiast, we got some fun conversations happening over there! Go to Technician Database, and sign up, I will have to approve you so it might take a few hours to join. Also, be sure to post in the “First 50” thread, you will be locked in as a founding member, and I will be giving something cool away.
This is a picture that I took on Monday. I was doing a 20,000 mile service on a 2010 Jetta, and this caught my eye. The bolt was out about 1/4 of an inch. I checked the history to see if the shop had done any work in this area. The customer did have an alignment done, but that was at ~1300 miles. I wouldn’t think that it could be loose for that many miles. I am surprised that the customer didn’t notice a clunking due to the bolt being loose.
It actually brings up a good point. When something like this happens, what does a mechanic do? If I say something to the customer, we would get blamed for messing the car up. VW warranty would not pay to tighten a bolt. The best thing for everyone is for me just to fix it. Not really hide what I found, but it was not worth stirring up trouble over. I torqued the bolt, and went through the other bolts on the subframe just to make sure they were properly torqued. I didn’t get paid anything to do it, but I surely couldn’t let the car go with a loose bolt.
This is an axle from a 2005 Jetta. The outer joint to be exact. The boot was split, so I removed the axle to replace the boot. This is actually a really common repair. Something that I have done lots of times. A couple of whacks with a 3lb sledge hammer and the joint comes right off. This one however didn’t want to play nice. I tried for about 30 minutes to separate the joint from the axle shaft. I beat the out edge of the joint up pretty bad. I finally had to accept defeat and tell the customer they needed a new axle. It really sucks that the customer had to buy a new axle, but I really did everything I could.
Knowing that the customer had agreed to buy a new axle, I was totally determined to get he joint apart. I brought out the big guns. I used my air hammer, but all I did was break the joint more. Since I had to send the old part back, I figured it was better just to call it quits. I don’t like to lose!
This is a short video of a crazy instrument cluster. This Jetta had several water leaks. I never found any water in the cluster, but something really pissed it off. This might be one of the strangest acting clusters I have ever seen. Also if you don’t drive a VW, the buzz that this cluster is making sounds NOTHING like it should. I recommend watching this a few times. Watch how fast the 2 small gauges move. This car is actually still at my work. The customer fixed the issues, but they have not came to get it yet. I think we are going on 3 months. I am pretty sure it was towed in before Christmas.
I hope you guys have a really great weekend. I will be spending some time in the forum, so swing by and say hello! Also, if you want to connect with me, the 2 best ways are on Twitter, or just email me!