After a conversation on twitter, I wanted to talk a little about safety. Let’s face it, the environment mechanics work in, is not the safest place in the world. In fact we have to attend an annual safety meeting to be sure that we know NOT to put gasoline in a Gatorade bottle, because you will forget, and then drink it. 😉
There are very standard hazards like, slipping and falling, getting cut, and dropping things. A lot of times these hazards can be avoided, or the effects mitigated by wearing proper attire, and not being stupid! We had a guy at the shop stab a wire tool through his hand. He was holding the connector in the palm of his hand, and slipped or something, the result was him being out for several months. It is just like cutting something INTO your hand, instead of away from it. ~DON’T TO THAT~
We also deal in some pretty gross chemicals. Gas, coolant, brake cleaner, brake fluid (and more) can be bad news. Most are under pressure while in a car. Hot coolant will melt skin on contact. Most of the chemicals in a car are are very toxic. I use gloves almost all the time to try and keep my hands from getting jacked up. Well, that and I don’t really like getting dirty.(is that weird?) Safety when it comes to chemicals is so important. I can’t even begin to tell you what an eye full of gasoline feels like.
One of my lease favorite things about this job is dealing with cars that have water damage. Going beyond the smell, and dealing with interiors that are wet, they can have mold build up. I have worked on so many cars with water damage it is not even funny. I remember one Passat that I worked on, you could see the line on the door panel where the water had been. At one time there must have been 10 inches of water standing in the car. Turns out it was from New Orleans and was flooded by hurricane Katrina.
Inhaling badness is also something we deal with. The conversation on twitter was about a how one of the techs in the shop was being dumb and not paying attention to what he was doing. He had a car running while filling it with coolant. The coolant spilled over and hit the cars exhaust. That caused the coolant to become steam and “smoke” up the shop. The smell of burning coolant smells like burning syrup, and not in a good way. I also remember one time where an oil seal went bad on a turbo. This pumped about 2qts of oil into the exhaust. After replacing the turbo, I had to burn all the oil out. It looked the the shop was on fire. Let me tell you how breathing that stuff is awful, and then you stink like burning oil the rest of the day.
Working in a shop is not the most dangerous job in the world, but its does have some concerns. Most of the hazards can be avoided by not being stupid, and using proper equipment. Working smart and clean will help to mitigate lots of injuries! Cuts, scrapes, bruises, and sore backs are not avoidable, but safety needs to be taken seriously!
One more thing, don’t forget to check out the Automotive Forum. It is not just for mechanics. I actually have a section just for customers to post questions, comments and brag about their mechanics! Just remember, I am trying to keep all the spam out. You will need to be approved, and that might take a few hours. If you sign up and don’t get an approval, just contact me with your email and let me know. I get about 50 spams a day on the forum.